Skip to main content
Dastex Group GmbH

KIMTECH™ G3 Sterile Latex 

Latex glove

To this glove in our product portfolio

Facts


Show comparison list
Surface cleanliness
Grip
Elongation
Endotoxin pollution
Ion-free
Cytostatics compatible
Chemical protection
sterile
textured
hand specific

Latex

Kimtech™ G3 Sterile Latex, Art.-No. 3509

Material: Latex

Properties

  • 100% latex
  • sterile
  • smooth – double dressing suitable
  • packed in pairs in foil
  • hand specific

Advantages

  • satisfactory surface cleanliness
  • very good form fit
  • very high elasticity
  • very high tear resistance

Application

  • sterile production / aseptic filling
  • for heavy mechanical stress

Product recommen­dation based on cleanroom classes

Air cleanliness class EN ISO 14644-1
particulate monitored areas

123456789staubarm

Hygiene zones according to GMP
microbiological monitored areas

ABCDE

PPE

Personal protective equipment
Regulation (EU) 2016/425

Kat. IKat. IIKat. IIInicht anwendbarCat. III

A one-to-one classification of cleanroom gloves to a cleanroom class according to ISO 14644-1 is not possible. Recommendations can only be made based on cleanroom specific requirements, e.g. "abrasion resistance" or "particle emission". In the VDI guideline 2083 Part 9.2 the user can find additional information.

Technical data

    Unit of measurementValueTest method
Material     100% Latex  
Perforation-free1
AQL value as defined in ISO 2859-1
for attribute testing on samples		   AQL1 1.5 ASTM D5151 + EN 374-2
Tear resistance before ageing
after accelerated ageing 		MPa, nominal 28
27 		ASTM D412 + ASTM D573
Extreme extensibility before ageing
after accelerated ageing 		%, nominal
 880
900 		ASTM D412 + ASTM D573
Dimensions
nominal single wall thickness 		middle finger
hand surface
cuff 		mm 0.22
0.20
0.14 		ASTM D3577 + EN 455-2:2015
Length   mm
" 		305
12 		 
Size/palm width 6
6½
7
7½
8
8½
9
10 		mm 77
83
89
95
102
108
114
130 		ASTM D3577 + EN 455-2:2015
Biocompatibility     n.s. Primary Skin Irritation Tests +
Dermal Sensitization Test
according to ASTM F720-13
Extractable particles > 0.5 µm number/cm2 max. 1,500 IEST-RP-CC005
Extractable substances
Ions

Ammonium (NH4+)
Bromide (Br-)
Calcium (Ca+)
Chloride (ClO2-)
Copper (Cu+)
Fluoride (F-)
Iron (Fe+)
Lithium (Li+)
Magnesium (Mg+)
Nitrate (NO3-)
Nitrite (NO2-)
Phosphate (PO43-)
Potassium (K+)
Sodium (Na+)
Sulphate (SO42-)
Zinc (Zn+) 		µm/cm2
specification
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s. 		µm/cm2
typical value
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s. 		IEST-RP-CC005.4
Endotoxins (maximum) Endotoxin units (EU) (EU) per pair 20 Kinetic turbidimetric
LAL test method
Silicones, amides,Di-n-octyl phthalate (DNOP)     not detectable IEST-RP-CC005.4
FTIR measuring method
Non Volatile Residues (NVR)   µg/g n.s. IEST-RP-CC005.4
Aqueous extractable proteins
in latex
   µg/g max. 50 ASTM D5712 + EN ISO 21420:2020
Electrostatic behaviour

     n.s. EN 1149-5:2003
PU     20 pairs
flat pairwise packed
in double PE-bags
  
Carton quantity     200 pairs,
10 bags of 20 pairs
  

The manufacturer's technical data listed above are typical values at the time of publication. They are not specifications. All data are without guarantee, changes are possible without prior notice.

To top