+++ 04.11.2024 - 11:21 Uhr: The sales units for selected products will be optimised shortly. If you have any questions about this, please call your contact person in the sales department. +++

Skip to main content
Dastex Group GmbHDastex Group GmbH

KIMTECH™ M7 

Face veil with elastic head tie, finished polyester gauze, covered and shapeable nose bridge

Back to our face veil in the product portfolio
Width
Bacterial Filtration Efficiency
Particulate Filtration Efficiency
Pressure difference delta P
sterile
latex-free
three layer

Disposable garments for the facial area

Kimtech™ M7, disposable face veil with elastic knitted headband, Art.-No. 43530
38 cm
-
13 % at 0,5 µm
0.1 mm H2O
at 8l/min flow rate
  • non-sterile
  • without natural latex
  • under controlled conditions double packed in PE bag
  • for particle monitored cleanrooms
  • as a supplement to the reusable concept

Product recommen­dation based on cleanroom classes

Air cleanliness class EN ISO 14644-1
particulate monitored areas

123456789low dust

Hygiene zones according to GMP
microbiological monitored areas

ABCDE

A one-to-one classification of disposable face veils to a cleanroom class according to ISO 14644-1 is not possible. Recommendations can only be made based on cleanroom specific requirements, e.g. "abrasion resistance" or "particle emission" and, to some extent, „filtration efficiency“. In the VDI guideline 2083 Part 9.2  chapter 6 the user can find additional information.

Technical data

  Unit of measurement Value Test method
Material type (face veil)   spray coat/film*
n. s. 		 
Width (± 5 mm) cm 33
  
Height (± 5 mm) cm 38
  
Materials (veil)
external layer
carrier layer
  
Polyethylene (PE)*
n. s. 		 
Pleating   without  
Type of fastening   elastic head loop,
tubular knitted 		 
Materials (fastening)   Polyester (PES)
  
Material nose bridge/bow   completely closed,
malleable aluminium strip
  
Seams   thermally bonded
  
Particle filtration efficiency (PFE) % at 0.5 µm 13 ASTM F2299
Standard Test Method for Determining the Initial Efficiency of Materials
Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
Bacterial filtration efficiency (BFE) % at 0.3 µm n. s. ASTM F2101
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of
Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus
Breathability / pressure difference (∆P) mm H2O
at 8 l/minute flow rate 		0.1 MIL-M-36954C
Viral filter efficiency (VFE) % per l/minute n.s.  
Colour (face mask/fastening)   white/white
  
PU   150 pieces in a cardboard box,
3 double bags of 50 pieces,
stacked 		 

The manufacturer's technical data listed above are typical values at the time of publication. They are not specifications. All data are without guarantee, changes are possible without prior notice.