+++ 04.11.2024 - 11:21 Uhr: The sales units for selected products will be optimised shortly. If you have any questions about this, please call your contact person in the sales department. +++

Skip to main content
Dastex Group GmbHDastex Group GmbH

KIMTECH™ M3 

Sterile disposable face mask with ties

Back to the face mask in the product portfolio
Width
Bacterial Filtration Efficiency
Particulate Filtration Efficiency
Pressure difference delta P
sterile
latex-free
three layer

Disposable garments for the facial area

Kimtech™ M3, disposable face mask with soft ties, Art. No. 44830
23 cm
≥89% at 0.3 µm
≥84% at 0.1 µm
≤2.5 mm H2O/cm2
  • sterile
  • without natural latex
  • under controlled conditions triple packed in PE bag
  • aseptic filling and production

Product recommen­dation based on cleanroom classes

Air cleanliness class EN ISO 14644-1
particulate monitored areas

123456789low dust

Hygiene zones according to GMP
microbiological monitored areas

ABCDE

A one-to-one classification of disposable face masks to a cleanroom class according to ISO 14644-1 is not possible. Recommendations can only be made based on cleanroom specific requirements, e.g. "abrasion resistance" or "particle emission" and, to some extent, „filtration efficiency“. In the VDI guideline 2083 Part 9.2 chapter 6 the user can find additional information.

Technical data

    Unit of measurement Value Test method
Type of material (face mask)     spray coat/film*
spunbonded fabric 		 
Width (± 5 mm)   cm 23
  
Height (± 5 mm)   cm 9.5
  
Materials (face mask)
outer layer
filter medium
inner layer 		   
polyethylene (PE) *
polypropylene (PP)
BICOSOFTM (PE) 		 
Pleating     three times
  
Type of fastening     binding ties, flat
hydro-entangled non-woven fabric
  
Materials (fastening)     Polyester (PES)
  
Material nose bridge/iron     completely wrapped,
malleable aluminium strip 		 
Seams     thermally bonded
  
Particle filtration efficiency (PFE)   % at 0.1 µm ≥84 ASTM F2299 Standard Test Method for Determining the Initial Efficiency of Materials
Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
Bacterial filtration efficiency (BFE)   % at 0.3 µm ≥89 ASTM F2101 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE)
of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus
Breathability / differential pressure (∆P)   mm H2O/cm2 ≤2.5 MIL-M-36954C
U.S. Department of Defence test method for disposable surgical masks
Viral filter efficiency (VFE)   % per x l/min A. n.s.  
Airborne Particles
(APC by Helmke Drum) 		  ≥0.5 µm Cat. I (<460) IEST-RP-CC003.4
Garment System Considerations for Cleanrooms and Other Controlled Environments
Sterility   SAL value 10-6 ANSI / AAMI / ISO 11137
Colour (face mask/band)     white/white
  
PU     200 pieces in a cardboard,
10 bags of 20 pieces,
individually foil-packed 		 

The manufacturer's technical data listed above are typical values at the time of publication. They are not specifications. All data are without guarantee, changes are possible without prior notice.