+++ 04.11.2024 - 11:21 Uhr: The sales units for selected products will be optimised shortly. If you have any questions about this, please call your contact person in the sales department. +++

Skip to main content

StatZorb®

Polyester wipe

Back to our polyester wipes

The wipe StatZorb®, made of 98% polyester, 2% conductive fibre, is static dissipative. Its unique grid pattern minimizes "hot spots" and is especially suitable for cleaning work in electrostatically critical areas. The abrasion-resistant wipe is pre-washed in a cleanroom laundry (air cleanliness class ISO 4) and double packed.

Facts

Particle emission (dry)
Particle emission (wet)
Abrasion resistance
Wet cleaning
Dry cleaning
Chemical permanence
Electrostatic behaviour
Softness
Sealed edges
decontaminated
sterile

Polyester

StatZorb®

Interlock knit, 98% PES / 2% PA/C fibres, antistatic

-

Properties

  • 98% polyester, 2% conductive fibre (polyamide/carbon)
  • interlock fabric made from filaments with a specially designed grid weave pattern
  • surface resistance 4.3 x 107
  • electrostatic discharge < 1.5 sec.
  • laser cut and sealed edges
  • decontaminated in a cleanroom laundry
  • double bag packed in a cleanroom (air cleanliness class ISO 4)

Advantages

  • electrostatically conductive wipe on both sides thanks to the grid pattern of the threads with carbon
  • reduced particle and fibre emission due to the thermally sealed edges
  • abrasion and chemical resistance

Applications

  • cleaning work in electrostatically critical areas
  • dry wiping of sensitive electronic components
  • manufacture of disk drives and magnetic resonance heads

Product recommen­dation based on cleanroom classes


123456789low dust


ABCDE

Of course, cleanroom wipes used in ISO 5 can also be used in ISO 9, but in this case the economic efficiency and usefulness should be considered.

A 1 to 1 allocation of cleanroom wipes to an air cleanliness class according to ISO 14644-1 is not possible. Recommendations can only be made on the basis of special properties relevant from a cleanroom technical point of view, such as "abrasion resistance" or "particle emission". Users can find further information on this in VDI Guideline 2083 Part 9.2.

Technical data

Properties   Unit of measurementValueTest method
Material     98% PES, 2% conductive fibre (PA/C)  
Edge processing     laser cut  
Mass per unit area   g/m2 135  
Absorption capacity
(Ai) intrinsic
(Ae) extrinsic
 
ml/g
ml/m2

1.6
215
IEST-RP-CC004.2
Section 7.1
Absorption rate   second 1 IEST-RP-CC004.2
Section 7.1
Surface resistivity   Ohm 4.3 x 107 n. s.
Electrostatic dissipation   second < 1.5 n. s.
NVR
Non-volatile residues
IPA based
DI water based
g/m2
g/m2
0.332
0.075
IEST-RP-CC004.2
Section 6.1.2
Particle residues ≥ 0.5 µm x 106/m2 33.6 IEST-RP-CC004.2
Section 5.1
Fibre residues > 100 µm 103/m2 5.7 IEST-RP-CC004.2
Section 5.2
Ionic residues Sodium (Na+)
Chloride (ClO2-)
ppm
ppm
12
9
IEST-RP-CC004.2
Section 6.2.2
Organic contaminants silicone oil
amides
D-n-octylphthalate (DOP)
  n. s.
n. s.
n. s.
by FTIR spectrometer
Fourier transform infrared spectrometer
  Size/PU/CartonsubpackedArt. No.
  9" x 9" 1,800 12 bags à 150 wipes 51344
      n. s. = not specified
n. d. = not detectable
 

Note

The manufacturer's technical data listed above are typical values at the time of publication. They are not specifications. All data are without guarantee, changes are possible without prior notice.
Due to different test methods depending on the respective manufacturers and test laboratories, most of the given values cannot be compared one-to-one with those of other manufacturers/wipes.
Independent tests can be commissioned on request.

To top