Series 410, a 100% polyester wipe knitted from filaments, is one of the most efficient cleanroom wipes for more critical areas, both in microbiological controlled and in purely particle controlled zones. The cloth is cut by laser and thus the wipe edges are sealed. After cutting, the wipes are professionally decontaminated in a cleanroom laundry and packed under ISO 4 conditions (EN ISO 14644-1). Even if made of 100% polyester, the double-layer wipes, quilted together by ultrasonic welding, have a very high absorption capacity. However, the liquid stored in the wipe is also evenly released back to a surface when required, which is why the series 410 is particularly popular in the pharmaceutical sector (in combination with disinfectants). The robust polyester knitted fabric shows its strength on rougher surfaces or on sharp-edged objects and/or surfaces. Due to the cleanroom-compatible post-cleaning after manufacturing, the wipes have relatively low levels of ionic and metallic contamination.
The series 410 is also available in a gamma-irradiated version.
Facts
Polyester
Knit, 100% PES filaments, double layer, laser-sealed edges
Properties
- 100% polyester
- two-ply interlock fabric made of filaments, ultrasonically welded and quilted
- laser cut and sealed edges
- very low particle and fibre emission
- decontaminated in a cleanroom laundry
- double bag packed in a cleanroom (air cleanliness class ISO 4)
Advantages
- specially absorbent due to the double knitted construction
- reduced particle and fibre emission due to the sealed edges
- broad range of applications
- available in a gamma-irradiated version
Applications
- cleaning wipe especially for critical areas
- cleaning wipe for areas where high absorbency and purity are required
- good suitable for angular, rough surfaces and objects which might prematurely damage a non-woven fabric wipe
Product recommendation based on cleanroom classes
Of course, cleanroom wipes used in ISO 5 can also be used in ISO 9, but in this case the economic efficiency and usefulness should be considered.
A 1 to 1 allocation of cleanroom wipes to an air cleanliness class according to ISO 14644-1 is not possible. Recommendations can only be made on the basis of special properties relevant from a cleanroom technical point of view, such as "abrasion resistance" or "particle emission". Users can find further information on this in VDI Guideline 2083 Part 9.2.
Technical data
| Properties | Unit of measurement | Value | Test method | |
|---|---|---|---|---|
| Material | 100% PES | |||
| Edge processing | Laser cut | |||
| Mass per unit area | g/m2 | 251 | ||
| Thickness |
mils mm |
36 0.91 | ||
|
Absorptive capacity (Ai) intrinsic (Ae) extrinsic | ml/g ml/m2 | 2.7 660 | IEST-RP-CC004.3 | |
|
NVR Non-volatile residues |
IPA based DI water based |
g/m2 g/m2 |
0.075 0.018 | IEST-RP-CC004.3 |
| Particulate residues |
0.5 – < 5.0 µm > 5.0 – ≤ 100 µm |
x 106/m2 x 106/m2 |
13 0.13 |
IEST-RP-CC004.3 Section 6.1.3 Biaxial Shake Test |
| Fibre residues | > 100 µm | fibres/m2 | 550 |
IEST-RP-CC004.3 Section 6.2.2.2 |
| Ionic residues |
Sodium (Na+) Chloride (ClO2-) |
ppm ppm |
0.8 0.7 |
IEST-RP-CC004.3 Section 7.2.2.1 |
| Organic contaminants |
silicone oil amides D-n-octylphthalate (DOP) |
n. s. n. s. n. s. |
by FTIR spectrometer Fourier transform infrared spectrometer | |
| Size | PU/Carton | subpacked | Art. No. | |
bulk-packed bulk-packed |
4" x 4" 9" x 9" 12" x 12" 12" x 6" 16" x 6" 12" x 12" 16" x 16" |
3,600 1,000 500 1,000 800 400 500 |
12 bags à 300 wipes 10 bags à 100 wipes 5 bags à 100 wipes 10 bags à 100 wipes 8 Beutel à 100 wipes 4 bags à 100 wipes 5 bags à 100 wipes |
55410 0404 55410 0909 55410 1212 55410 1206 55410 1606 55410-bulk 1212 55410-bulk 1616 |
| n. s. = not specified n. d. = not detectable |
Note