The Clino® One Way Profi disposable wipe, a microfibre wipe made of polyester and polyamide (80%/20%), is characterised by very good cleaning performance, even with greasy dirt. Even though it is made of purely synthetic fibres, the wipe has a sufficient absorption capacity for aqueous solutions. The chemical resistance is given with acids (peracetic acid), alkalis (caustic soda, nitric acid), bleaching agents, solvents (isopropanol, acetone, benzene compounds). The wipes are primarily used in areas that are controlled purely by particles, but can also be used at any time in microbiological controlled zones. The cutting is done by ultrasound and thus the edges are sealed. After cutting, the wipes are professionally decontaminated in a cleanroom laundry and packed under ISO class 5 conditions. Due to the cleanroom-compatible post-cleaning, the wipes have relatively low levels of ionic and metallic contamination.
Facts
Special requirements
Microfibre wipe, woven, 80% PES / 20% PA
Properties
- 80% polyester / 20% polyamide
- woven from microfibre filaments
- ultrasonically cut and sealed edges
- decontaminated in a cleanroom laundry
- vacuum-packed twice in PE film in a cleanroom
Advantages
- very good cleaning performance due to the elastic and dense weave and the structured surface
- low abrasion even under heavy mechanical load
- high chemical resistance and low abrasion due to the twisted threads
Applications
- effective removal of particulate and organic contamination
- very well suited for wiping highly sensitive surfaces
Product recommendation based on cleanroom classes
Of course, cleanroom wipes used in ISO 5 can also be used in ISO 9, but in this case the economic efficiency and usefulness should be considered.
A 1 to 1 allocation of cleanroom wipes to an air cleanliness class according to ISO 14644-1 is not possible. Recommendations can only be made on the basis of special properties relevant from a cleanroom technical point of view, such as "abrasion resistance" or "particle emission". Users can find further information on this in VDI Guideline 2083 Part 9.2.
Technical data
| Properties | Unit of measurement | Value | Test method | |
|---|---|---|---|---|
| Material | 80% PES / 20% PA | |||
| Edge processing | ultrasonic cut | |||
| Mass per unit area | g/m2 | 100 ± 5 |
ASTM D3776 Standard Test Methods for Mass Per Unit Area (Weight) of FabricISO 9073 | |
| Weight (wipe) | g | 9.29 | ASTM D3776 | |
| Thickness | mm | 0.22 ± 0.02 |
ASTM D1777 Standard Test Method for Thickness of Textile MaterialsISO 9073-2 Textiles – Test methods for nonwovens – Part 2: Determination of thickness | |
|
Absorptive capacity Ai intrinsic Ae extrinsic | ml/g ml/m2 | n. s. 200 |
IEST-RP-CC004.3 Section 8.2 | |
| Absorbency rate | sec. | < 5 |
IEST-RP-CC004.3 Section 8.2 | |
|
NVR Non-volatile residues |
IPA based DI water based |
g/m2 g/m2 | < 1.5 < 0.8 |
IEST-RP-CC004.3 Section 7 |
| Particulate residues | > 0.5 µm | particles/wipe | < 100 | IEST-RP-CC003.4 |
| Fibre residues | > 100 | fibres/m2 | < 500 | IEST-RP-CC003.4 |
| Organic substances | µg/g or ppm | not detectable |
IEST-RP-CC004.3 Section 7 | |
| Ionic residues |
Chloride (ClO2-) Nitrite (NO2-) Sodium (Na+) Sulphate (SO42-) |
µg/g µg/g µg/g µg/g | < 4 < 4 < 4 < 4 |
IEST-RP-CC004.3 Section 7 |
| Organic contaminants |
silicone oil amides D-n-octylphthalate (DOP) |
n. s. n. s. n. s. |
by FTIR spectrometer Fourier transform infrared spectrometer | |
| Size | PU/Carton | subpacked | Art. No. | |
|
12" x 12" (30,48 x 30,48 cm) | 1,500 | 10 bags à 150 wipes | 55429 | |
| n. s. = not specified n. d. = not detectable |
Note