Facts
Show comparison list
Abrasion resistance
Sense of touch
Grip
Elongation
Conductivity
Coating
Textile gloves
Protection gloves FG-26, Art.-No. 30900-26
Material : Textile gloves
none
Properties
- 99% meta-aramid, 1% conductive fibre
- heat protection (+100 °C)
- packed in pairs in bags
- hand specific
Advantages
- adequate surface cleanliness
- robust
- abrasion resistant
- can be used up to 100 °C
- 26 to 30,5 cm long
Application
- for low process requirements
- for personal protection requirements according
Regulation (EU) 2016/425
Product recommendation based on cleanroom classes
Air cleanliness class EN ISO 14644-1
particulate monitored areas
Hygiene zones according to GMP
microbiological monitored areas
PPE
Personal protective equipment
Regulation (EU) 2016/425
A one-to-one classification of cleanroom gloves to a cleanroom class according to ISO 14644-1 is not possible. Recommendations can only be made based on cleanroom specific requirements, e.g. "abrasion resistance" or "particle emission". In the VDI guideline 2083 Part 9.2 the user can find additional information.
Technical data
| Unit of measurement | Value | Test method | |
| Material |
99% meta-aramid, 1% conductive yarn | ||
| Type of fabric | ends per inch (EPI) |
plain 90 (warp) 80 (weft) | |
| Surface weight | g/m² | 220 | |
| Lining material | % | 100% polyester | |
| Size / length | cm ± 1.0 |
M / 26 L / 27 XL / 28 XXL / 30.5 | |
| Width | cm ± 0.5 |
M / 13 L / 13 XL / 14 XXL / 14 | |
| Surface resistivity | Ohm | 107-109 | |
|
Thermal risks Limited flame spread (Afterburning time / Afterglow time) Contact heat (Tc / tt) Convective heat (Heat Transfer Index) Radiant heat (t24) Small splashes of molten metal Large quantities of molten metal | Performance level | 4 (≤ 2 s / ≤ 5 s) 1 (100 °C / ≥ 15 s) 2 (≥ 7 s) 1 (≥ 7 s) X (not applicable) X (not applicable) |
EN 407:2004 Protective gloves and other hand protective equipment against thermal risks (heat and/or fire) |
| After flame | sec |
0 (warp) 0 (weft) | FED-STD-191-5903 |
| Afterglow | sec |
2.05 (warp) 2.15 (weft) | FED-STD-191-5903 |
| Scorching length | cm |
3.5 (warp) 3.5 (weft) | FED-STD-191-5903 |
| Shrinkage, wet | % |
0.0 (warp) -0.3 (weft) | AATCC 135-IV-1995 |
| Shrinkage, drying | % |
0.18 (warp) 0.18 (weft) | JIS L 1042-HI-1986 |
| Evaluation* | C.C./cm²/sec | 11.36 | JIS L 1096:1979 |
| Washing instructions |
washable at 95 ºC do not use bleach/chlorine observe the restrictions on the use of the detergent | ||
| PU | 1 pair, flat-bagged | ||
| Carton quantity | depending on order quantity | ||
|
*Evaluation of the general properties of general woven textiles and of weft and warp knitted loop fabrics |