Facts
Show comparison list
Nitrile
Material: Nitrile
Properties
- 100% nitrile
- powder-free
- packed in boxes
- ambidextrous
Advantages
- adequate surface cleanliness
- very good form fit
- good grip
- packaging made of recycled paper board
- 50% more content with the same standard size
- imprinting reduced by 60%
Application
- for laboratory requirements
- when a high level of sensitivity is required
Product recommendation based on cleanroom classes
Air cleanliness class EN ISO 14644-1
particulate monitored areas
Hygiene zones according to GMP
microbiological monitored areas
PPE
Personal protective equipment
Regulation (EU) 2016/425
A one-to-one classification of cleanroom gloves to a cleanroom class according to ISO 14644-1 is not possible. Recommendations can only be made based on cleanroom specific requirements, e.g. "abrasion resistance" or "particle emission". In the VDI guideline 2083 Part 9.2 the user can find additional information.
Technical data
Unit of measurement | Value | Test method | ||
Material | 100% nitrile | |||
Perforation-free1 AQL value as defined in ISO 2859-1 for attribute testing on samples | AQL1 | 0.25 Level 3 |
EN 374-2:2014 EN 455-1:2000 | |
Tear resistance |
before ageing after accelerated ageing | N spec/typical |
≥ 6.0/8.0 ≥ 6.0/7.0 |
EN 455-2:2015 + ASTM D412-15a ASTM D573-04(2015) |
Extreme elongation |
before ageing after accelerated ageing |
% specification |
≥ 500 ≥ 400 |
EN 455-2:2015 + ASTM D412-15a ASTM D573-04(2015) |
Dimensions nominal single wall thickness |
middle finger palm cuff | mm |
0.17 0.10 0.08 | ASTM D3767-03(2014) |
Length from tip of middle finger to cuff's end | mm min./typical |
≥ 250/255 (XS/6-L/9) ≥ 26 /265 (XL/10) | EN 455-2:2015 | |
Size/palm width nominal width |
XS / 6 S / 7 M / 8 L / 9 XL / 10 | mm |
≤ 80 85 95 105 ≥ 110 | EN 455-2:2015 |
Size/Hand circumference nominal |
XS / 6 S / 7 M / 8 L / 9 XL / 10 |
mm |
152 178 203 229 254 | EN 455-2:2015 |
Viral penetration |
PFU/ml | < 1 |
ISO 16604:2004 Procedure B (penetration test using bacteriophage Phi-X174) ISO 374-5:2016 | |
Biocompatibility | passed |
ISO 10993-10:2010 Tests after irritation and skin sensitization | ||
Powder residue values |
mg/glove typical (max.) |
powder-free ≤ 1.0 (max. 2.0) | ISO 21171:2006 | |
Extractable particles | ≥ 0.5 µm/cm2 |
spec typical |
n.s. n.s. | IEST-RP-CC005.4 |
Extractable substances | Ions Ammonium (NH4+) Bromide (Br-) Calcium (Ca+) Chloride (ClO2-) Copper (Cu+) Fluoride (F-) Iron (Fe+) Lithium (Li+) Magnesium (Mg+) Nitrate (NO3-) Nitrite (NO2-) Phosphate (PO43-) Potassium (K+) Sodium (Na+) Sulphate (SO42-) Zinc (Zn+) |
µm/cm2 specification n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. |
µm/cm2 typical value n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. n.s. | IEST-RP-CC005.4 |
Non volatile residues (NVR) | mg/g | n.s. | IEST-RP-CC005.4 | |
Endotoxins (maximum) |
Endotoxin units (EU) per pair | n.s. |
Turbimetric Kinetic Limulus Amoebocyte Lysate Test | |
Vulcanisation accelerators | free | produced without thiazoles and thiurames | ||
Electrostatic behaviour (ESD) | tested | EN 1149-1/2/3 & 5 | ||
PU |
150 pieces flat packed in a carton dispenser (inner box) | |||
Carton quantity |
1,500 pieces 10 carton dispensers |