+++ 04.11.2024 - 11:21 Uhr: The sales units for selected products will be optimised shortly. If you have any questions about this, please call your contact person in the sales department. +++

Skip to main content
Dastex Group GmbHDastex Group GmbH

duoSHIELD™ PFT Latex 240

Latex glove

To this glove in our product portfolio

Facts


Show comparison list
Surface cleanliness
Grip
Elongation
Endotoxin pollution
Ion-free
Cytostatics compatible
Chemical protection
sterile
textured
hand specific

Latex

duoSHIELD™ PFT Latex 240, Art.-No. 3831

Material: Latex

Properties

  • 100% latex
  • powder-free
  • packed in boxes
  • ambidextrous

Advantages

  • adequate surface cleanliness
  • very good form fit
  • good grip
  • very high elasticity

Application

  • for laboratory requirements
  • when a high level of sensitivity is required

Product recommen­dation based on cleanroom classes

Air cleanliness class EN ISO 14644-1
particulate monitored areas

123456789low dust

Hygiene zones according to GMP
microbiological monitored areas

ABCDE

PPE

Personal protective equipment
Regulation (EU) 2016/425

Cat. ICat. IICat. IIInot aplicable

A one-to-one classification of cleanroom gloves to a cleanroom class according to ISO 14644-1 is not possible. Recommendations can only be made based on cleanroom specific requirements, e.g. "abrasion resistance" or "particle emission". In the VDI guideline 2083 Part 9.2 the user can find additional information.

Technical data

    Unit of measurementValueTest method
Material     100% Latex (NR)  
Perforation-free1
AQL value as defined in ISO 2859-1
for attribute testing on samples		   AQL1 1.5 EN 455-1:2000 + EN 374-2:2014
Tear resistance before ageing
after accelerated ageing 		MPa, specific 18
14 		EN 455-2:2015 + ASTM D412-16
ASTM D573-04(2015)
Extreme extensibility before ageing
after accelerated ageing 		%, specific
 ≥ 700
≥ 500 		EN 455-2:2015 + ASTM D412-16
ASTM D573-04(2015)
Dimensions
nominal single wall thickness 		middle finger
hand surface
cuff 		mm 0.18
0.14
0.12 		ASTM D3767 + ASTM D3577
Length
tip middle finger to end cuff		   mm
typical 		240
242 		EN ISO 21420:2020 +
EN 455-2:2015
Size/palm width
nominal 		XS/6
S/7
M/8
L/9
XL/10 		mm ≤ 80
85
95
105
≥ 110 		EN 455-2:2015
Extractable particles ≥ 0.5 µm specific
typical
number/cm2		 n.s.
 IEST-RP-CC005.2
Extractable substances
Ions

Ammonium (NH4+)
Bromide (Br-)
Calcium (Ca+)
Chloride (ClO2-)
Copper (Cu+)
Fluoride (F-)
Iron (Fe+)
Lithium (Li+)
Magnesium (Mg+)
Nitrate (NO3-)
Nitrite (NO2-)
Phosphate (PO43-)
Potassium (K+)
Sodium (Na+)
Sulphate (SO42-)
Zinc (Zn+) 		µm/cm2
specification
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s. 		µm/cm2
typical value
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s.
n.s. 		IEST-RP-CC005.4
Biocompatibility     certified ISO 10993-10:2010
Tests for irritation and skin sensitization
Powder residue values   mg/gloves
typical (max.) 		powder-free
≤ 1.0 (max. 2.0) 		ISO 21171:2006
Glove-related allergies
sensitisation of water-soluble
natural latex proteins
(type 1 allergy) 		  µg/g specific
µg/g typical 		< 50
< 30 		EN 455-3:2015 + ASTM D5712-15
Modified Lowry Method
Non Volatile Residues (NVR)   mg/g n.s. IEST-RP-CC005.4
Endotoxins (maximum)   Endotoxin units
(EU)per pair 		n.s. Kinetic turbidimetric
LAL test method
Surface Resistance   Ω/sq. n.s. ASTM D257-14
PU     100 pieces
flat packed in a carton
dispenser (inner box)		  
Carton quantity     1.000 pieces
10 carton dispenser		  

The manufacturer's technical data listed above are typical values at the time of publication. They are not specifications. All data are without guarantee, changes are possible without prior notice.

To top